// m-p_rattle_mug_show_data.js  :   pot pictures
 var ImgFldr = "Pot-imgs/ratmug/" ;
 var ThumbFldr = "Pot-imgs/ratmug/thms/"  ;
 var LargeImageNameSizeSuffix ="h400" ;
 var no=0;
 var yes=1;
 var Thumbs= yes ;
 var ThumbNameSizeSuffix ="h40.jpg" ;
//________  PicNameType values are "fromFileName", "picCaption_array"  ___ set here_ pop below__
 var PicNameType = "picCaption_array";
 
//______________JS Data _______________________
if (document.images)
{
   var LgImages = new Array(
"Fig_00_rattlemug-b1_h400.jpg",
"Fig_00b_rattlemug-b3_h400.jpg",
"Fig_01_Throwing_Mug_P3230031_h400.jpg",
"Fig_02_Roll_Coil_1P3230002_h400.jpg" ,
"Fig_03_Center_and_Secure_Mug_1P3230007_h400.jpg" ,
"Fig_04_Score_the_Mug_1P3230009_h400.jpg" ,
"Fig_05_Add_Slip_to_Score_1P3230010_h400.jpg" ,
"Fig_06_Coil_to_Base_1P3230013_h400.jpg" ,
"Fig_07_Overlap_Coil_Ends_1P3230014_h400.jpg" ,
"Fig_08_Cut_Coil_Ends_1P3230017_h400.jpg" ,
"Fig_09_Align_Coil_Ends_1P3230018_h400.jpg" ,
"Fig_10_Attach_n_Smooth_Coil_1P3230019_h400.jpg" ,
"Fig_11_Center_n_Throw_Coil_1P3230020_h400.jpg" ,
"Fig_12_Pull_Cylinder_1P3230024_h400.jpg" ,
"Fig_13_Roll_Clay_Balls_1P3230025_h400.jpg" ,
"Fig_14_Wrap_Clay_Balls_1P3230028_h400.jpg" ,
"Fig_15_Drop_Balls_In_Cylinder_1P3230029_h400.jpg" ,
"Fig_16_Close_Base_Cylinder_1P3230032_h400.jpg" ,
"Fig_17_Shape_Base_w_Rib_1P3230034_h400.jpg" ,
"Fig_18_Puncture_w_Needle_Tool_2P3230006_h400.jpg" ,
"Fig_19_Continue_shaping_w_Rib_2P3230001_h400.jpg" ,
"Fig_20_Pull_n_attach_handle_3P3240016_h400.jpg" ,
"Fig_21_Decorative_Holes_3P3260005_h400.jpg" ,
"Fig_22_3_Rattle_Mugs_3P3230006_h400.jpg" ,
"Fig_23_Black_Rattle_Mug_3P3230009_h400.jpg" ,
"Fig_24_Blue_Rattle_Mug_3P3230010_h400.jpg" 
 ) ;

  var picCaption = new Array( "Anasazi rattle mug", "Anasazi rattle mug bottom showing plugged hole believed used to insert rattles", "Fig. 1 Throwing the mug", "Fig. 2 Roll a clay coil", "Fig. 3 Center and secure mug prior to attaching  the coil bottom" , "Fig. 4 Score the mug", "Fig. 5 Add slip to the score marks", "Fig. 6 Attach the coil to the mug base" , "Fig. 7 Overlap the coil ends" , "Fig. 8 Cut the coil ends" , "Fig. 9 Align the coil ends" , "Fig.10 Attach and smooth the coil" , "Fig. 11 Center and throw the coil" , "Fig. 12 Pull cylinder" , "Fig. 13 Roll clay balls for rattles" , "Fig. 14 Wrap clay balls with paper" ,"Fig. 15 Drop the balls in the base cylinder" , "Fig. 16 Close base cylinder" ,"Fig. 17 Shape the base with a rib" , "Fig. 18 Puncture air holes in the hollow base with a needle tool" ,"Fig. 19 Continue shaping with a rib" , "Fig. 20 Pull and attach mug handle" ,"Fig. 21 Drill decorative holes" , "Fig. 22 Three finished rattle mugs" ,"Fig. 23 Finished black rattle mug" , "Fig. 24 A blue rattle mug (note- no decorative holes)" ) ;
}